Cellulose Nitrates-Blended Composites from Bacterial and Plant-Based Celluloses.

Cellulose nitrates (CNs)-blended composites based on celluloses of bacterial origin (bacterial cellulose (BC)) and plant origin (oat-hull cellulose (OHC)) were synthesized in this study for the first time. Novel CNs-blended composites made of bacterial and plant-based celluloses with different BC-to-OHC mass ratios of 70/30, 50/50, and 30/70 were developed and fully characterized, and two methods were employed to nitrate the initial BC and OHC, and the three cellulose blends: the first method involved the use of sulfuric-nitric mixed acids (MAs), while the second method utilized concentrated nitric acid in the presence of methylene chloride (NA + MC). The CNs obtained using these two nitration methods were found to differ between each other, most notably, in viscosity: the samples nitrated with NA + MC had an extremely high viscosity of 927 mPa·s through to the formation of an immobile transparent acetonogel. Irrespective of the nitration method, the CN from BC (CN BC) was found to exhibit a higher nitrogen content than the CN from OHC (CN OHC), 12.20-12.32% vs. 11.58-11.60%, respectively. For the starting BC itself, all the cellulose blends of the starting celluloses and their CNs were detected using the SEM technique to have a reticulate fiber nanostructure. The cellulose samples and their CNs were detected using the IR spectroscopy to have basic functional groups. TGA/DTA analyses of the starting cellulose samples and the CNs therefrom demonstrated that the synthesized CN samples were of high purity and had high specific heats of decomposition at 6.14-7.13 kJ/g, corroborating their energy density. The CN BC is an excellent component with in-demand energetic performance; in particular, it has a higher nitrogen content while having a stable nanostructure. The CN BC was discovered to have a positive impact on the stability, structure, and energetic characteristics of the composites. The presence of CN OHC can make CNs-blended composites cheaper. These new CNs-blended composites made of bacterial and plant celluloses are much-needed in advanced, high-performance energetic materials.

Recent Advances in Miscanthus Macromolecule Conversion: A Brief Overview.

Miscanthus is a valuable renewable feedstock and has a significant potential for the manufacture of diverse biotechnology products based on macromolecules such as cellulose, hemicelluloses and lignin. Herein, we overviewed the state-of-the art of research on the conversion of miscanthus polymers into biotechnology products comprising low-molecular compounds and macromolecules: bioethanol, biogas, bacterial cellulose, enzymes (cellulases, laccases), lactic acid, lipids, fumaric acid and polyhydroxyalkanoates. The present review aims to assess the potential of converting miscanthus polymers in order to develop sustainable technologies.

Review of Current Prospects for Using Miscanthus-Based Polymers.

Carbon neutrality is a requisite for industrial development in modern times. In this paper, we review information on possible applications of polymers from the energy crop Miscanthus in the global industries, and we highlight the life cycle aspects of Miscanthus in detail. We discuss the benefits of Miscanthus cultivation on unoccupied marginal lands as well as the rationale for the capabilities of Miscanthus regarding both soil carbon storage and soil remediation. We also discuss key trends in the processing of Miscanthus biopolymers for applications such as a fuel resources, as part of composite materials, and as feedstock for fractionation in order to extract cellulose, lignin, and other valuable chemicals (hydroxymethylfurfural, furfural, phenols) for the subsequent chemical synthesis of a variety of products. The potentialities of the biotechnological transformation of the Miscanthus biomass into carbohydrate nutrient media and then into the final products of microbiological synthesis are also examined herein.

Promising Energetic Polymers from Nanostructured Bacterial Cellulose.

This study investigated the nitration of nanostructured bacterial cellulose (NBC). The NBC, obtained using symbiotic Medusomyces gisevii Sa-12 as the microbial producer and then freeze-dried, was nitrated herein by two methods, the first using mixed sulphuric-nitric acids (MA) and the second using concentrated nitric acid in the presence of methylene chloride (NA+MC). The synthesized samples of NBC nitrates (NBCNs) exhibited 11.77-12.27% nitrogen content, a viscosity of 1086 mPa·s or higher, 0.7-14.5% solubility in an alcohol-ester mixture, and 0.002% ash. Scanning electron microscopy showed that the nitration compacted the NBC structure, with the original reticulate pattern of the structure being preserved in full. Infrared spectroscopy for the presence of functional nitro groups at 1658-1659, 1280, 838-840, 749-751 and 693-694 cm-1 confirmed the synthesis of cellulose nitrates in particular. Thermogravimetric and differential thermal analyses showed the resultant NBCNs to have a high purity and high specific heats of decomposition of 6.94-7.08 kJ/g. The NBCN samples differ conceptually from plant-based cellulose nitrates by having a viscosity above 1086 mPa·s and a unique 3D reticulate structure that is retained during the nitration. The findings suggest that the NBCNs can be considered for use in novel high-tech materials and science-driven fields distinct from the application fields of plant-based cellulose nitrates. The NBCN sample obtained with NA+MC has the ability to generate an organogel when it is dissolved in acetone. Because of the said property, this NBCN sample can find use as a classical adhesive scaffold and an energetic gel matrix for creating promising energetic polymers.

Simultaneous Production of Cellulose Nitrates and Bacterial Cellulose from Lignocellulose of Energy Crop.

This study is focused on exploring the feasibility of simultaneously producing the two products, cellulose nitrates (CNs) and bacterial cellulose (BC), from Miscanthus × giganteus. The starting cellulose for them was isolated by successive treatments of the feedstock with HNO3 and NaOH solutions. The cellulose was subjected to enzymatic hydrolysis for 2, 8, and 24 h. The cellulose samples after the hydrolysis were distinct in structure from the starting sample (degree of polymerization (DP) 1770, degree of crystallinity (DC) 64%) and between each other (DP 1510-1760, DC 72-75%). The nitration showed that these samples and the starting cellulose could successfully be nitrated to furnish acetone-soluble CNs. Extending the hydrolysis time from 2 h to 24 h led to an enhanced yield of CNs from 116 to 131%, with the nitrogen content and the viscosity of the CN samples increasing from 11.35 to 11.83% and from 94 to 119 mPa·s, respectively. The SEM analysis demonstrated that CNs retained the fiber shape. The IR spectroscopy confirmed that the synthesized material was specifically CNs, as evidenced by the characteristic frequencies of 1657-1659, 1277, 832-833, 747, and 688-690 cm-1. Nutrient media derived from the hydrolyzates obtained in 8 h and 24 h were of good quality for the synthesis of BC, with yields of 11.1% and 9.6%, respectively. The BC samples had a reticulate structure made of interlaced microfibrils with 65 and 81 nm widths and DPs of 2100 and 2300, respectively. It is for the first time that such an approach for the simultaneous production of CNs and BC has been employed.

Evaluation of Chemical Composition of Miscanthus × giganteus Raised in Different Climate Regions in Russia.

Lignocellulosic biomass is of great interest as an alternative energy resource because it offers a range of merits. Miscanthus × giganteus is a lignocellulosic feedstock of special interest, as it combines a high biomass productivity with a low environmental impact, including CO2 emission control. The chemical composition of lignocellulose determines the application potential for efficient industrial processing. Here, we compiled a sample collection of Miscanthus × giganteus that had been cultivated in different climate regions between 2019 and 2021. The chemical composition was quantified by the conventional wet methods. The findings were compared with each other and with the known data. Starting as soon as the first vegetation year, Miscanthus was shown to feature the following chemical composition: 43.2-55.5% cellulose content, 17.1-25.1% acid-insoluble lignin content, 17.9-22.9% pentosan content, 0.90-2.95% ash content, and 0.3-1.2% extractives. The habitat and the surrounding environment were discovered herein to affect the chemical composition of Miscanthus. The stem part of Miscanthus was found to be richer in cellulose than the leaf (48.4-54.9% vs. 47.2-48.9%, respectively), regardless of the planation age and habitat. The obtained findings broaden the investigative geography of the chemical composition of Miscanthus and corroborate the high value of Miscanthus for industrial conversion thereof into cellulosic products worldwide.

Properties and Hydrolysis Behavior of Celluloses of Different Origin.

The present paper is a fundamental study on the physicochemical properties and hydrolysis behavior of cellulose samples differing in origin: bacterial, synthetic, and vegetal. Bacterial cellulose was produced by Medusomyces gisevii Sa-12 in an enzymatic hydrolyzate derived from oat-hull pulp. Synthetic cellulose was obtained from an aqueous glucose solution by electropolymerization. Plant-based cellulose was isolated by treatment of Miscanthus sacchariflorus with dilute NaOH and HNO3 solutions. We explored different properties of cellulose samples, such as chemical composition, degree of polymerization (DP), degree of crystallinity (DC), porosity, and reported infrared spectroscopy and scanning electron microscopy results. The hydrolysis behavior was most notable dependent on the origin of cellulose. For the bacterial cellulose sample (2010 DP, 90% DC, 89.4% RS yield), the major property affecting the hydrolysis behavior was its unique nanoscale reticulate structure promoting fast penetration of cellulases into the substrate structure. The study on enzymatic hydrolysis showed that the hydrolysis behavior of synthetic and Miscanthus celluloses was most influenced by the substrate properties such as DP, DC and morphological structure. The yield of reducing sugars (RS) by hydrolysis of synthetic cellulose exhibiting a 3140 DP, 80% DC, and highly depolymerization-resistant fibers was 27%. In contrast, the hydrolysis of Miscanthus-derived cellulose with a 1030 DP, 68% DC, and enzyme-accessible fibers provided the highest RS yield of 90%. The other properties examined herein (absence/presence of non-cellulosic impurities, specific surface, pore volume) had no considerable effect on the bioconversion of the cellulosic substrates.

Static Culture Combined with Aeration in Biosynthesis of Bacterial Cellulose.

One of the ways to enhance the yield of bacterial cellulose (BC) is by using dynamic aeration and different-type bioreactors because the microbial producers are strict aerobes. But in this case, the BC quality tends to worsen. Here we have combined static culture with aeration in the biosynthesis of BC by symbiotic Medusomyces gisevii Sa-12 for the first time. A new aeration method by feeding the air onto the growth medium surface is proposed herein. The culture was performed in a Binder-400 climate chamber. The study found that the air feed at a rate of 6.3 L/min allows a 25% increase in the BC yield. Moreover, this aeration mode resulted in BC samples of stable quality. The thermogravimetric and X-ray structural characteristics were retained: the crystallinity index in reflection and transmission geometries were 89% and 92%, respectively, and the allomorph Iα content was 94%. Slight decreases in the degree of polymerization (by 12.0% compared to the control-no aeration) and elastic modulus (by 12.6%) are not critical. Thus, the simple aeration by feeding the air onto the culture medium surface has turned out to be an excellent alternative to dynamic aeration. Usually, when the cultivation conditions, including the aeration ones, are changed, characteristics of the resultant BC are altered either, due to the sensitivity of individual microbial strains. In our case, the stable parameters of BC samples under variable aeration conditions are explained by the concomitant factors: the new efficient aeration method and the highly adaptive microbial producer-symbiotic Medusomyces gisevii Sa-12.

Scale-Up of Biosynthesis Process of Bacterial Nanocellulose.

Bacterial nanocellulose (BNC) is a unique product of microbiological synthesis, having a lot of applications among which the most important is biomedicine. Objective complexities in scaling up the biosynthesis of BNC are associated with the nature of microbial producers for which BNC is not the target metabolite, therefore biosynthesis lasts long, with the BNC yield being small. Thus, the BNC scale-up problem has not yet been overcome. Here we performed biosynthesis of three scaled sheets of BNC (each having a surface area of 29,400 cm2, a container volume of 441 L, and a nutrient medium volume of 260 L and characterized them. The static biosynthesis of BNC in a semisynthetic nutrient medium was scaled up using the Medusomyces gisevii Sa-12 symbiotic culture. The experiment was run in duplicate. The BNC pellicle was removed once from the nutrient medium in the first experiment and twice in the second experiment, in which case the inoculum and glucose were not additionally added to the medium. The resultant BNC sheets were characterized by scanning electron microscopy, capillary viscosimetry, infrared spectroscopy, thermomechanical and thermogravimetric analyses. When the nutrient medium was scaled up from 0.1 to 260 L, the elastic modulus of BNC samples increased tenfold and the degree of polymerization 2.5-fold. Besides, we demonstrated that scaled BNC sheets could be removed at least twice from one volume of the nutrient medium, with the yield and quality of BNC remaining the same. Consequently, the world's largest BNC sheets 210 cm long and 140 cm wide, having a surface area of 29,400 cm2 each (weighing 16.24 to 17.04 kg), have been obtained in which an adult with burns or vast wounds can easily be wrapped. The resultant sheets exhibit a typical architecture of cellulosic fibers that form a spatial 3D structure which refers to individual and extremely important characteristics of BNC. Here we thus demonstrated the scale-up of biosynthesis of BNC with improved properties, and this result was achieved by using the symbiotic culture.

Bacterial Nanocellulose Nitrates.

Bacterial nanocellulose (BNC) whose biosynthesis fully conforms to green chemistry principles arouses much interest of specialists in technical chemistry and materials science because of its specific properties, such as nanostructure, purity, thermal stability, reactivity, high crystallinity, etc. The functionalization of the BNC surface remains a priority research area of polymers. The present study was aimed at scaled production of an enlarged BNC sample and at synthesizing cellulose nitrate (CN) therefrom. Cyclic biosynthesis of BNC was run in a semisynthetic glucose medium of 10-72 L in volume by using the Medusomyces gisevii Sa-12 symbiont. The most representative BNC sample weighing 6800 g and having an α-cellulose content of 99% and a polymerization degree of 4000 was nitrated. The nitration of freeze-dried BNC was performed with sulfuric-nitric mixed acid. BNC was examined by scanning electron microscopy (SEM) and infrared spectroscopy (IR), and CN was explored to a fuller extent by SEM, IR, thermogravimetric analysis/differential scanning analysis (TGA/DTA) and 13C nuclear magnetic resonance (NMR) spectroscopy. The three-cycle biosynthesis of BNC with an increasing volume of the nutrient medium from 10 to 72 L was successfully scaled up in nonsterile conditions to afford 9432 g of BNC gel-films. CNs with a nitrogen content of 10.96% and a viscosity of 916 cP were synthesized. It was found by the SEM technique that the CN preserved the 3D reticulate structure of initial BNC fibers a marginal thickening of the nanofibers themselves. Different analytical techniques reliably proved the resultant nitration product to be CN. When dissolved in acetone, the CN was found to form a clear high-viscosity organogel whose further studies will broaden application fields of the modified BNC.

Pretreatments of Non-Woody Cellulosic Feedstocks for Bacterial Cellulose Synthesis.

Pretreatment of biomass is a key step in the production of valuable products, including high-tech bacterial cellulose. The efficiency of five different pretreatment methods of Miscanthus and oat hulls for enzymatic hydrolysis and subsequent synthesis of bacterial cellulose (BC) was evaluated herein: Hydrothermobaric treatment, single-stage treatments with dilute HNO3 or dilute NaOH solution, and two-stage combined treatment with dilute HNO3 and NaOH solutions in direct and reverse order. The performance of enzymatic hydrolysis of pretreatment products was found to increase by a factor of 4-7. All the resultant hydrolyzates were composed chiefly of glucose, as the xylose percentage in total reducing sugars (RS) was 1-9%. The test synthesis of BC demonstrated good quality of nutrient media prepared from all the enzymatic hydrolyzates, except the hydrothermobaric treatment hydrolyzate. For biosynthesis of BC, single-stage pretreatments with either dilute HNO3 or dilute NaOH are advised due their simplicity and the high performance of enzymatic hydrolysis of pretreatment products (RS yield 79.7-83.4%).